Loading
Maguire Venturi Loading Systems
Maguire
Venturi Loaders keep your hopper filled automatically and
are available with both visual and audible alarms to warn
if the loader fails to fill the hopper. If floor personnel
fail to respond to the alarms within 5 minutes, a process
shutdown feature (available as an option) will shut off the
flow of natural material to the process (preventing production
of off-color parts). The control can accommodate up to (4
switches to control 4 venturi loaders.
Four models available:
Model
ML
Model ML automatically loads material at rates of up to 200
lbs. per hour. A low-level sensor signals an air solenoid
to begin loading. Loading continues until the sensor is covered.
An in-line ON/OFF switch is located on the power cord of the
loader.
Model ML-A
Model MLA adds audio and strobe-light alarms to the Model
ML, which alert the operator to exhausted material supply
or stoppages. If loader "ON" time exceeds two minutes,
a STROBE light will flash, and electronic beeper will sound
continuously until floor personnel respond.
Model MPL-AS
Model MPL-AS adds an additional timer and a material-shutoff
valve to the (alarm-equipped) Model MLA If floor personnel
do not satisfy the alarm condition within five minutes, a
material flow valve is activated. This valve discontinues
the flow of natural material to the process, thereby preventing
the process from continuing.
Model ML-1R Regrind Loader
Model ML-1R is designed specifically for regrind. A larger
diameter air amplifier and tube are used for maximum air flow
and efficient conveying of regrind. This unit is very effective
for emptying granulator drawers equipped for vacuum takeoff.
The ML-1R venturi loader will not convey pellets it is designed
for regrind only.
 |
Maguire
Venturi Loading Systems carry a 5 year factory warranty.
Maguire warrants this equipment to be free from defects
in workmanship under normal use and service. |
|
|
